Tempest Balloon Inflators

CATALOG SPECIALS          STUMPF HOME PAGE         PRODUCTS LISTED ALPHABETICALLY       USED EQUIPMENT

Stumpf Super Lightweight Balloons Home Page  

 

Call or e-mail Stumpf's TO ORDER: 1 -800 -942 -9411 / Minimum order $25.00

Ordering procedures link

 

NOW OFFERING 20% DISCOUNT ON ALL TEMPEST INFLATOR FANS

 

REDBLACKLOGO[1].gif (2078 bytes)home_image[1].jpg (17933 bytes)HOT AIR BALLOON INFLATORS

THE CHOICE OF PROFESSIONAL BALLOONISTS WORLDWIDE.

Tempest offers you a wide variety of inflators to choose from.  There are seven models including five standard Tempest belt-drives and two new "Safety First" direct drive units.

us[1].gif (82 bytes) MADE IN USA

 

 

BAL_colortep[1].gif (3714 bytes)WINNING STEP TILT  Patented, 5-position, foot operated mechanism allows for precise tilting of the shroud.

 

img_3ebec146[1].gif (3069 bytes)OFF-ROAD BALLOON TIRES   9" pneumatic tires make movement through even rough terrain, smooth and effortless.

 

img_3ebea764[1].gif (3696 bytes)TURBO 2000 SHROUD / FRONT & REAR SAFETY GRILLS New shroud design dramatically increases performance while precisely spaced grills meet European and OSHA safety standards.

 

SAFETY

No Debris pick-up.  Tempest's exclusive shroud design virtually eliminates ground debris pick-up. Unshrouded fans can turn debris into dangerous projectiles.

Seven-Blades are better.  Tempest's blades have been dynamically and statically balanced to ensure maximum performance and safety. No Tempest balloon inflator blade has EVER been reported broken in service. Seven blades also help balance out the stresses exerted on the engine crankshaft, prolonging engine life and greatly reducing the chance of a crankshaft failure. Tempest's seven-blade propeller delivers a more consistent and even volume of air.  You get a better and faster inflation.

Shroud and grills protect your crew.   Tempest safety features like the Turbo 2000 spun aluminum shroud and front and rear grills help protect against accidents.

Precise pressure head.  The Turbo 2000 shroud creates a unique cone-of-air that seals the envelope mouth opening.   This "pressure head" helps prevent the envelope from collapsing or rolling in the wind.  Caged units create a "shaft" of air and may create an unwanted "spinnaker effect" as air goes in one side of the mouth and out the other.

The right horsepower.  More engine horsepower does not equate to better performance.  Higher horsepower simply results in the blade spinning faster. Tempest matches the pitch of the blade to the engine design to reach maximum efficiency. The result is higher performance, and longer engine and crankshaft life.

PRICE

No other manufacturer offers you more for your money.  That's why most professional balloonists use a Tempest.   With exclusive safety features like the Turbo 2000 shroud, 5-position foot-operated tilt, pneumatic tires, and retractable handle, Tempest is the clear choice.

Tempest inflators are competitively priced against the manufactured caged fans, but offer a lot more for the money.  Tempest units are engineered to last for years, without the costly repairs and breakdowns of other fans.  Most Tempest Inflators purchased over 8-10 years ago are still in service and outperforming new caged fans.  Dollar for dollar you get the maximum performance and the lowest overall annual cost with a Tempest Inflator.

NOW OFFERING 20% DISCOUNT ON ALL TEMPEST INFLATOR FANS

ITEM NAME BLADE SIZE ENGINE AND HORSEPOWER / RPM OUTPUT (CFM**) WEIGHT PRICE
BELT DRIVE 21" HONDA 6.5 HP 21" HONDA 6.5 HP  /  3165 RPM 17,743 CFM   79 LBS Call

Dimensions:  Height 26.5"

Width:   24.88"

Depth:

19"
BELT DRIVE 24" HONDA 6.5 HP 24" HONDA 6.5 HP /  3175 RPM 18,130 CFM 92 LBS Call

Dimensions:  Height 30.75"

Width:  27.75"

Depth:

20.25"
BELT DRIVE 27" HONDA 9 HP 27" HONDA 9 HP /  2672 RPM 23,943 CFM 135 LBS Call

Dimensions:  Height 32.5"

Width:   30.63"

Depth:

26.63"
DIRECT DRIVE  24" HONDA 6.5 HP 24" HONDA 6.5 HP / 3042 RPM 19,606 CFM 82 LBS Call

Dimensions:  Height 30.25"

Width:   28"

Depth:

19.5"
DIRECT DRIVE  24" HONDA 9.0 HP Safety First, balloon inflator model - call for more info 24" HONDA 9 HP / 3600RPM 19,600 CFM 88 LBS Call
Safety First, balloon inflator model - call for more info      

NOW OFFERING 20% DISCOUNT ON ALL TEMPEST INFLATOR FANS

**CFM=CUBIC FEET PER MINUTE OF AIR MOVEMENT.  When comparing different models, some inconsistencies may appear due to the fact that CFM output is based on actual Engine RPM's, NOT Engine Horsepower alone.

credit_cards[1].gif (1102 bytes)

DEALER DISCOUNTS AVAILABLE.

Call or e-mail Stumpf's TO ORDER: 1 -800 -942 -9411 / Minimum order $25.00

1999-2017 All rights reserved.

STUMPF BALLOONS   2926 Weston-Andover Rd. Andover, VT 05143

Phone: (802) 875-1600

psstumpf@aol.com e-mail

Hit Counter

CATALOG SPECIALS          STUMPF HOME PAGE         PRODUCTS LISTED ALPHABETICALLY       USED EQUIPMENT